An exclusive paint finish that replicates the
aesthetic qualities and feeling of warmth offered
by ceramics. As a result of its technical properties,
Glaze also delivers the same level of durability and
quality provided by aluminium coatings.
Composition Powder coating formulated with polyester resins, exempt from TGIC
Baking time / temperature 24 ºC to 150 ºC / 75,2 to 302 ºF
Environment declaration Adapta Vivendi (CPC3511-001) ISO 14025:2010
Marine Equipment Directive (MED) 2014/90/EU EN ISO 16000-9 (08/2006)
Performance
Composition Information
| Composition | Powder coating formulated with polyester resins, exempt from TGIC |
|---|---|
| Baking time / temperature | 24 ºC to 150 ºC / 75.2 to 302 ºF |
| Environment declaration | Adapta Vivendi (CPC3511-001) ISO 14025:2010 |
| Marine Equipment Directive (MED) | 2014/90/EU EN ISO 16000-9 (08/2006) |
Polymerization
Local supplier
Class A2 Care
Preventative care Protect surfaces with barrier elements like film, paper, and peelable lacquers before placement and handling. Immediate cleaning If accidental contamination or splashing of strong alkalis or acids occurs, wash the affected area with a large amount of clean water, especially cut-outs or holes and cavities. Periodic maintenance The accumulation of dirt or contamination on the profiles may increase the risk of corrosion, a loss of sheen, or a change of colour, especially in areas located near the coast and industrial environments. Do not use Abrasive materials or tools or anything that could cause scratches. Acidic or alkaline substances that could cause corrosion. Strong solvents, including petrol, diesel, and kerosene. Grease cleaners, pesticides, or lubricants whose composition is unknown. Detergents, oven cleaners, or other similar agents. Cleaning agents when the surface temperature is greater than 25ºC. Dry cleaning a dirty surface of dust or building materials. Avoid submersing a powder coated product in water for long periods of time. Chlorine might cause damage.
Characteristics
Electrostatic powder coating process applied. This paint mixes a specific resin that offers greater hardness compared to the paints used in architecture. Terrain Paints are designed to coat aluminium profiles used in architecture and for other substrates where the maximum resistance to the outdoors is needed. This is a powder coating formulated with polyester resins and free of TGIC, pigments, and additives. These provide excellent exterior durability with very good gloss retention and colour stability.