Main Image Collection
Relate Fabrics

Relate is a sophisticated twill weave upholstery textile designed by Patricia Urquiola made from Trevira CS, which has a soft hand resembling natural fibres.

The versatile palette for Relate comprises

14 colourways and expresses confident colour combinations by combining warm notes withclosely related nuances.

Composition 100% Trevira

Width Approx. 140 cm

Weight per m2 Approx. 328/m2

Lightfastness 5-7 (ISO 1-8)

Shrinking App 2%

Abrasion Martindale 80.000 Martindale

Wash load Half

Pilling 4-5 (ISO 1-5)

Colour Slight differences may occur

Produced in environment Greenguard Certification www.greenguard.org

Fire test AS/NZS 3837 class 2, BS 5852 Crib 5, BS 5852 part 1 with treatment, DIN 4102 B1, EN 1021-1/2, IMO FTP Code 2010 Part 8, NF D 60 013, NF P 92 503 M1, NFPA 701, SN 198 898 5.2, UNI 9177 Classe 1, US 1 Cal. BulI. 117-2013, ÖNORM B1/Q1




Suitable for indoor use only Suitable for indoor use only
Relate Fabrics (1/1)
V07
V04
V02
V09
V10
V12
V13
V17
V18
V20
V06
V25
V31
V32
Please note that colours displayed digitally may vary slightly from the actual product. Therefore, we recommend requesting samples before ordering.
All finishes
Relate Fabrics

Performance

Composition 100% Dyed Acrylic

Grammage (g/m2) 400

Resistant to superficial wetting 100 ISO 24920

Oil resistance 6 AATCC 118

Colour fastness to artificial weathering 7-8 blue scale (8) ISO 105-B04

Colour fastness to light 7-8 blue scale (8) ISO 105-B02

Tensile strength, warp 180 daN/5 cm ISO 13934

Tensile strength, weft 240 daN/5 cm ISO 13934

Tear resistance, warp (daN) 21.0 ISO 4674-1

Tear resistance, weft (daN) 29.0 ISO 4674-1

Abrasion resistance (Martindale) 30,000 cycles ISO 12947-2

Abrasion resistance (Wyzenbeek) 15,000 double rubs ASTM D4157

Cigarette ignition classification Class 1 NFPA 260

Material resistance to ignition without flame Pass CA TB 117

Care

Regular care
Regular cleaning is important in order to keep the upholstery textile looking its best and to prolong its life. Dust and dirt wear down the textile and also reduce its re-retardant properties. Vacuum frequently, ideally every week, at half power where appropriate. Wipe upholstery fabrics made from polyurethane with a dry or moist cloth. May also be vacuum cleaned with a soft brush.

Stain removal
If you act quickly, it is not difficult to remove spills and prevent stains from forming. However, we cannot guarantee complete stain removal. First, scrape off any liquids or hardened residues with a spoon or a scoop before you proceed. Any loose particles must be vacuum cleaned before further cleaning. Liquids must be soaked up with an absorbent napkin or cloth. Remove non-greasy stains by carefully dabbing with a lintfree cloth or sponge wrung out in warm water. Edge marks can be avoided by dabbing gently in circular motions towards the centre of the stain with a clean lint-free cloth. Remove greasy stains by using appropriate detergents or solvents. In all cases, we recommend to test stain-removal agents on an inconspicuous area first, to see if there is any effect on the cover. Make sure to dry the fabric fully before use. It may also be necessary to use a hairdryer to avoid leaving edge marks. This applies especially to microfibre textiles. These tips are purely recommendations and cannot guarantee complete stain removal. In all cases, we recommend contacting a professional dry cleaning. In order to ensure satisfactory results, particularly for large stains, we recommend to contact a professional dry cleaner. It is important to state whether the stain has already undergone treatment.

60 degree wash60 degree wash Dry cleaning (PCE only) Dry cleaning (PCE only) No thumble dryNo thumble dry Iron OkIron Ok

Characteristics

100% Trevira

Related documents

Copyright © 2022 Kettal, SL. All rights reserved.